How to Plan a Full Gridfinity Workshop System Using Only Your Phone Camera

How to Plan a Full Gridfinity Workshop System Using Only Your Phone Camera

Planning a full Gridfinity workshop system used to mean one thing: hours with a set of calipers, a CAD program open on one screen, and a half-finished insert on the other. Most makers start strong and stall out after two drawers because the process is too slow to sustain.

There is a faster path. With a phone camera and Snapfinity, you photograph a tool and get a print-ready Gridfinity insert file in minutes. No calipers. No CAD. The question is not how to make a single insert any more. It is how to work through an entire workshop without losing momentum. This guide covers exactly that.

If you have never made a Gridfinity insert before, start with the single-insert how-to first, then come back here for the full-workshop approach.

In this article

What do you need to start a full Gridfinity system?

Three things: a phone with a decent camera, a 3D printer loaded with PLA, and Snapfinity to generate the insert files. No calipers, no CAD software, no modelling experience required.

Snapfinity by DrRave — AI Gridfinity insert generator
AI Insert Generator
Snapfinity by DrRave

Take a photo of any tool. Get a custom, print-ready Gridfinity insert. No measuring, no CAD.


The starting point: tools without a home. Zone by zone, that changes fast.

Step 1: How do you map a workshop into Gridfinity zones?

Before you photograph a single tool, spend ten minutes dividing your workshop into zones. A zone is one drawer, one shelf, or one category of tools that lives together. Common zones for a maker workshop:

  • Hand tools (chisels, screwdrivers, pliers)
  • Measuring and marking (rules, squares, marking gauges)
  • Fasteners and hardware (screws, bolts, nuts, sorted by size)
  • Finishing (brushes, sandpaper, putty knives)
  • Electrical and soldering
  • Power tool accessories (bits, blades, collets)

Write the zones down. This list becomes your print queue. Working zone by zone means you finish one area completely before moving to the next, which prevents the half-finished-workshop stall that kills most Gridfinity projects. Start with the zone you use most often so you get an immediate payoff while the rest is still being built.

Step 2: How should you photograph tools for Gridfinity inserts?

For each zone, lay the tools flat on a clean, evenly lit surface and shoot straight down with your phone camera. A few things that consistently produce better results:

  • One tool or more per photo. Snapfinity reads each image and finds objects. It can do multi-tool bins, but in a workshop single object bins look best.
  • Consistent lighting. Natural light from a window, or a single overhead LED panel, beats mixed or directional light. Shadows across the tool make it harder to read the edges cleanly.
  • Calibration board. Print the povided calibration board on a plain A4 sheet. Snapfinity will correct perspective and measure accurately. 
  • Portrait orientation for long tools. Shoot a chisel or a marking knife in portrait mode so it fills the frame.

Batch the photos for one zone into a single folder on your phone before you move to generation. This keeps things tidy when you upload.


Straight down, even light, plain background. That is the whole setup.
Snapfinity by DrRave
AI Insert Generator
Snapfinity by DrRave

One photo per tool. One file per insert. Works through a full workshop as fast as your printer can run.

Step 3: Should you generate all inserts at once or in batches?

In batches, always. Work through one zone at a time in Snapfinity. Upload the photos, generate the insert files, and queue them as a batch in your slicer so the printer runs overnight. Then move to the next zone only once the current batch is printed and fitted.

Here is a rough guide to what each zone involves:

Zone Typical tool count Estimated print time
Hand tools (1 drawer) 6 to 10 tools 4 to 8 hours
Measuring and marking 4 to 8 tools 3 to 6 hours
Fasteners (sorted bins) 10 to 20 bins 8 to 16 hours
Power tool accessories 5 to 12 items 4 to 10 hours

Step 4: Why print one test piece before running the full batch?

Before sending twenty inserts to the printer, print the most complex one in the zone first and check the fit. Look for three things:

  • Does the tool drop in without forcing it?
  • Does it sit flush with the top of the Gridfinity base plate?
  • Is there too much play, or is the fit snug enough to hold the tool in place?

If something is off, the most common fix is re-shooting the tool with better overhead lighting and a cleaner background. Once one test piece fits well, the rest of the batch will follow the same result, and you can run the full overnight queue with confidence.


Test one insert before you commit the batch. Five minutes now saves a full reprint later.

Step 5: How do you lock in a Gridfinity system so it stays organised?

Once a zone is printed and fitted, do three things to lock it in before moving on:

  1. Label the drawer or shelf. A printed label or a strip of tape with a marker is enough. The goal is that anyone else in the workshop can find a tool without asking.
  2. Take a reference photo of the finished drawer. Shoot straight down with all tools in their inserts. This becomes your reset map: you can see at a glance what belongs where and what is missing.
  3. Note what you would change after a week of use. After living with the zone for a few days, you may want to swap two tools, add a bin for something you overlooked, or drop an insert for a tool you never actually use. Make those adjustments now, before moving to the next zone, so the system reflects how you actually work.

Then move to the next zone and repeat. Most makers work through a full workshop in two to four weekends, generating files and fitting inserts in the evenings while the printer runs overnight.

Snapfinity by DrRave
AI Insert Generator
Snapfinity by DrRave

Photograph your tools tonight. Wake up to a finished zone tomorrow.

Frequently asked questions

How many Gridfinity inserts does a typical workshop need?

A small to medium maker workshop with three to five drawers and a wall board typically needs 30 to 80 individual inserts. Working zone by zone with Snapfinity, most people complete the full system over two to four weekends.

Do I need a specific type of 3D printer for Gridfinity inserts?

Any FDM printer with a build plate of at least 180 x 180 mm can print standard Gridfinity inserts. PLA is the recommended material for workshop use. A 0.4 mm nozzle at 0.2 mm layer height produces clean results without any specialised settings.

What if the Snapfinity insert does not fit the tool correctly?

The most common cause is uneven lighting or a photo taken at an angle rather than straight overhead. Re-shoot the tool on a clean calibration board with even light from directly above, then regenerate. One clear overhead photo consistently produces the best result.

Can Snapfinity handle oddly shaped tools like pliers or curved handles?

Yes. Irregular shapes are exactly where a photo-based approach saves the most time compared to manual calipers and CAD. Tools like combination pliers, tin snips, and curved carving gouges are a good test case for the system.

How long does it take to photograph and generate inserts for one drawer?

Photographing a 10-tool drawer takes around 10 to 15 minutes. Generating the insert files through Snapfinity adds a few minutes per tool. Budget about 30 to 45 minutes of active time per drawer before you hand off to the printer.

Ready to Stop Measuring and Start Printing?

Take a photo of any tool. Get a custom Gridfinity insert. Repeat until your workshop is done.

Get Snapfinity for $9.99 →

One-time purchase. Yours to use on every tool in every drawer.

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.